PSTX370-600-70 500 V -257 kW 370 A ABB Soft Starter
Technical
Rated Operational Voltage: |
Main Circuit 208 ... 600 V AC |
Rated Control Supply Voltage (Us): |
100 ... 250 V |
Rated Control Circuit Voltage (Uc): |
DC Operation 24 V |
Rated Frequency (f): |
Main Circuit 50/60 Hz |
Rated Operational Power - In-Line Connection (Pe): |
(400 V) 200 kW |
Rated Operational Current - In-Line Connection (Ie): |
370 A |
Rated Operational Power - Inside Delta Connection: |
at 400 V 355 kW |
Rated Operational Current - Inside Delta Connection: |
640 A |
Service Factor Percentage: |
100 % |
Overload Protection: |
Build-in electronic overload protection |
Integrated Electronic Overload: |
Yes |
Adjustable Rated Motor Current Ie: |
30 ... 100 % |
Starting Capacity at Maximum Rated Current Ie: |
4xIe for 10s |
Ramp Time: |
1 ... 120 second [unit of time] |
Initial Voltage During Start: |
10 ... 99 % |
Step Down Voltage Special Ramp: |
100 ... 10 % |
Current Limit Function: |
1.5 … 7.5 xle |
Switch for Inside Delta Connection: |
Yes |
Run Signal Relay: |
Yes |
By-pass Signal Relay: |
Yes |
Fault Signal Relay: |
Yes |
Overload Signal Relay: |
Yes |
Analog Outputs: |
0…10 V, 0…20 mA, 4…20 mA |
Signal indication ready to start/standby ON (LED): |
Green |
Signal indication running R (LED): |
Green |
Signal indication protection (LED): |
Yellow |
Signal indication fault (LED): |
Red |
Communication: |
Built in Modbus interface, Anybus, FieldBusPlug (with adapter). |
Terminal Type: |
Main Circuit: Bars |
Connecting Capacity Main Circuit: |
Hole Diameter 8.5 mm |
Connecting Capacity Control Circuit: |
Rigid 1x2.5 mm² |
Connecting Capacity Supply Circuit: |
Rigid 1x2.5 mm² |
Tightening Torque: |
Main Circuit 25 N·m |
Product Main Type: |
PSTX370 |