DC88-1 24 V DC Albright Güç Kontaktörü
ÜRÜN ÖZELLİĞİ;
The DC88 motor reversing type of contactor has been designed for direct current loads, particularly motors as used on electric vehicles such as industrial trucks. The DC88 is a monoblock construction, resulting in a compact design which is compatible with modern electronic control systems. Developed for both interrupted and uninterrupted loads, the DC88 is suitable for switching Resistive, Capacitive and Inductive loads.
The main contact circuit, designed for motor reversing, has a built in failsafe, so that if both coils are energised simultaneously the contact arrangement is open circuit. The DC88 has double breaking main contacts with silver alloy contact tips, which are weld resistant, hard wearing and have excellent conductivity. The DC88 M8 main stud terminals can be configured in a variety of ways in order to suit the application. Coil connections are by means of 6.3mm spades and mounting is via the supplied bracket and can be horizontal or vertical, when vertical the M8 contact studs should point upwards. If the requirement is for downwards orientation we can adjust the contactor to compensate for this.
| APPLICATION | INTERRUPTED | UNINTERRUPTED |
| Thermal Current Rating | 100A | 100A |
| Intermittent Current Rating: | ||
| 30% Duty | 185A | 185A |
| 40% Duty | 160A | 160A |
| 50% Duty | 140A | 140A |
| 60% Duty | 130A | 130A |
| 70% Duty | 120A | 120A |
| Rated Fault Current Breaking Capacity (Icn) 5ms Time Constant:(In accordance with UL583*) | ||
| Blowouts | 600A at 80V D.C. | |
| No Blowouts | 800A at 48V D.C. | |
| Rated Fault Current Breaking Capacity (Icn) Resistive Load:(In accordance with UL508*) | ||
| Blowouts | - | |
| No Blowouts | - | |
| Maximum Recommended Contact Voltages | ||
| Blowouts | 96V | 96V |
| No Blowouts | 48V | 48V |
| Typical Voltage Drop per pole across New Contacts at 100A | 50mV | |
| Mechanical M.T.B.F | >5000000 Operations | |
| Coil Voltage Available (Us) (Rectifier board required for A.C.) | 6 - 240V | |
DC88 motor geri dönüşlü kontaktör tipi, özellikle akım kamyonları gibi elektrikli araçlarda kullanılan motorlar gibi doğru akım yükleri için tasarlanmıştır. DC88, monoblok bir yapıdır ve modern elektronik kontrol sistemleriyle uyumlu kompakt bir tasarıma sahiptir. Hem kesintili hem de kesintisiz yükler için geliştirilen DC88, Dirençli, Kapasitif ve İndüktif yükleri değiştirmek için uygundur.